INESUB S1

Copper-coated solid wire for submerged arc welding with 0,5% content to be used for the welding of common carbon steels and for the preparation of cushion layers in hard-facing operations. To be used with Mn-active fluxes such as INEFLUX MP.

INESUB S2Si

Copper-coated solid wire for submerged arc welding with 1% Mn content to be used for the welding of carbon and CMn steels. To be used with Mn-active fluxes such as INEFLUX MP.

INESUB S4

INESUB S2

Copper-coated solid wire for submerged arc welding with 1% Mn content to be used for the welding of carbon and CMn steels. To be used with Mn-active fluxes such as INEFLUX MP.

INESUB S3Si

Copper-coated solid wire for submerged arc welding with 1,7% Mn and 0,3% Si . To be used with Mn-active fluxes such as INEFLUX MP or INEFLUX BLKV

INESUB S3NIMO

Copper-coated solid wire for submerged arc welding with 1% Ni and 0,5 % Mo content to be used for welding high yield strength steels, with tensile strength higher than 690 MPa. Good impact strength at low temperatures.

INESUB EF3

INESUB EA3

Copper-coated solid wire for submerged arc welding with 2% Mn and 0,5% Mo content designed for welding low-alloy steels as high tensile strength and creep-resistant steels. Good impact at low temperatures. To be used with fluxes, such as INEFLUX MP.

INE JC-100® SAW

Copper-coated solid wire for submerged arc welding of high strength steels.

INESUB S2Ni1

AWS A 5.23: ENi1 EN ISO 14171-A: S2Ni1 solid wire for SAW welding of fine-grained steels 1% Ni. The presence of Ni. Improves the characteristics of toughness at -50 ° C. used on offshore, GPL transport and storage. Flux recomended INEFLUX BL LKV

INESUB S2Ni2

Solid wire for submerged arc welding with 2,25% Ni content, for steels having 2% Ni, fine grained for low temperature applications. Suitable for the construction of offshore platforms, tanks and pipelines. To be used with basic fluxes, such as INEFLUX BL KV

INESUB S2Ni3

Solid wire AWS A 5.23: ENi3 EN ISO 14171-A: S2Ni3 for submerged arc welding with 3,5% Ni content, for fine grained steels for low temperature applications. Suitable for the construction of offshore platforms, tanks and pipelines. To be used with basic fluxes, such as INEFLUX BL KV

INESUB S2MO

Exctra clean solid wire for SAW with 0.5% Mo used for welding low-alloyed steels and for creep resistance steels. Pipes and pressure vessels. To be used in combination with INEFLUX BL KV. Cooper free version available an request.

INESUB EB2R

INESUB EB6

Special SAW wire AWS A 5.28 : ER80S-B6: EN ISO 21952-A: W CrMo5Si with 5% Cr and 0.5% Mo, for creep resistant steels type 12 Cr Mo 19 5. Resistant to cold cracking. X and J Factor checked. Flux recommended INEFLUX BHA

INESUB EA3

Copper-coated solid wire for submerged arc welding with 2% Mn and 0,5% Mo content designed for welding low-alloy steels as high tensile strength and creep-resistant steels. Good impact at low temperatures. To be used with fluxes, such as INEFLUX MP.

INESUB EB3

INESUB EB8

Solid wire for submerged arc welding with 9% Cr and 1% Mo. for welding of creep resistant steel. Applications in power plants, chemical or petro-chemical industry, as for heat exchangers, boilers, piping. vessels for temperature service up to 600°C. To be used with INEFLUX BHA

INESUB EB2

INESUB EB3R

Solid wire AWS A 5.28: ER90S-B3 EN ISO 21952-B: G 62 M22 2C1ML Low-alloy 2.25% Cr and 1.0% Mo used for heat-resistant steels in chemical industry operating at 600 ° C. X and J Factor controlled

INESUB EB9

Solid wire for submerged arc welding with 9% Cr and 1% Mo.V.for welding of creep resistant steel. Applications in power plants, chemical or petro-chemical industry, as for heat exchangers, boilers, piping. vessels for temperature service up to 600°C. To be used with INEFLUX BHA