INETUB R70T1

Rutile flux cored wire designed for welding carbon and carbon-manganese steels with tensile strength up to 510 MPa. Good-looking weld beads, very limited spattering and easily removable slag. To be used under the shield of Ar+CO2.

INETUP M71TG

Metal-cored wire designed for welding carbon weather resisting steels. 20% more of deposition rate in comparison with solid wires, at the same amperage. To be used under the shield of Ar+CO2. AWS A 5.36: E71T15-M21A4-CS1

INETUB B71T5

Basic flux-cored wire for welding Carbon and Carbon-Manganese steels with tensile strength up to 510 MPa and fine grained cryogenic steels. To be used under the shield of Ar+CO2. AWS A 5.36: E71T5-M21A4-CS1

INETUB MHF 600

Metal-cored wire mostly for hard-facing wheels, rolling mill rollers tracks, sliding rollers, screws, mil crushing jaws and mill wheels. To be used under the shield of Ar+CO2. EN 14700: T Fe8 DIN 8555: MF 6-GF-60

INETUB R71T1

INETUB M71TG-CU

Metal-cored wire designed for welding weathering-resistant steels. Deposition rate 20% higher than solid wires. To be used under Ar+CO2 shielding gas. AWS A 5.28: E80C-W2

INETUB B71T5-A1

Basic low-alloy flux cored wire for welding of high strength low-alloy steels (HSLA) and 0.5% Mo creep-resistant steels with operating temperatures up to about 500 ° C. Suitable for single pass or multipass welding. To be used with gas protection of Ar + CO2 mixture.

INETUB ZN

Flux cored wire AWS A 5.20: E71T-G suitable for welding zinc-coated plates as well. Completely free of barium salts. It finds applications in car industry, To be used on DC- (DC operation, electrode negative polarity), under the shield of Ar+CO2.

INETUB R71T1-CO2

Rutile flux cored wire designed for welding carbon and C-Mn steels with tensile strength up to 510 MPa. Specifically designed for use in shipyards.To be used under the shield of carbon dioxide (CO2). AWS A 5.20: E71T-1C.

INETUB M111TG-K3

Metal-cored wire for welding high strength low alloy steels (HSLA) with a tensile strength above 770 MPa such as T-1, HY-80 and HY-100 steels. Excellent impact toughness down to -50°C. Suitable for metal working industry, offshore, cranes and other highly stressed structural components. To be used under the shield of Ar+CO2. AWS A 5.28: E110C-K3.

INETUB B81T5-B2

Basic flux-cored wire for welding 1.25% Cr - 0.5 % Mo creep resistant steels, with operating temperatures up to about 550 ° C. Suitable for welding in single pass or multipass pass. To be used with gas protection of Ar + CO2 mixture. AWS A 5.36: E81T5-M21PY-B2.

INETUB R81T1-Ni1

Rutile flux cored wire designed for welding 1% Nickel steels for low temperature applications (down to -50°C). To be used under Ar + CO2 shielding gas. AWS A 5.36: E81T1-M21A4-Ni1

INETUB M121TG-K4

Metal-cored wire for welding high strength low alloy steels (HSLA) with a tensile strength above 830 MPa such as HY-100 steel. Excellent impact toughness down to -50°C. Suitable for metal working industry, offshore, cranes and other highly stressed structural components. To be used under the shield of Ar+CO2. AWS A 5.28: E120C-K4.

INETUB B91T5-B3

Basic flux-cored wire for welding 2.25% Cr, 1 % Mo creep resistant steels, with operating temperatures up to about 600 °C. Suitable for welding in single pass or multipass pass. To be used with gas protection of Ar + CO2 mixture.

INETUB S71TGS

Open-arc flux cored wire (self-shielded) designed for welding thin carbon and carbon-manganese steels in all positions. To be used on DC- (DC operation, electrode negative polarity). EN 14700: T Fe8 (DIN 8555: MF 6-GF-60)

INETUB BA71TGS

Open-arc flux cored wire (self-shielded) designed for welding thin carbon and carbon-manganese steels in all positions. To be used on DC-(DC operation, electrode negative polarity). AWS A 5.20: E71T-GS