Επικοινωνήστε μαζί μας.
Τηλέφωνα επικοινωνίας: -
Η Αγγελάτος Λεωνίδας & ΣΙΑ Ο.Ε. εισάγει και σας προμηθεύει με τα κορυφαία στο χώρο προϊόντα οπως:
- Σύρματα MIG
- Βέργες TIG
- Παραγεμισμένα σύρματα FLUX CORED
- Βυθιζόμενου τόξου SA
Για κοινούς και βασικούς χάλυβες της Ιταλικής INE.
C AND C-MN STEELS
G2Si/ ER70S-3 Copper-coated solid wire designed for welding carbon and carbon-manganese steels. Suitable for single and multipass welding of general constructions. To be used under the shield of Ar+CO2 or CO2. |
Solid wire G3Si1/ER70S-6 for GMAW of C.Mn.
steels as used in general construction with tensile strength up to 510
MPa. Produced using high purities selected raw material. Arch stable
without spatters Shielded gas of Ar./ CO2 or CO2.
| G 4Si1/ER70S-6. Solid wire for GMAW of C.Mn. steels for general
construction with tensile strength up to 510 MPa. Produced using high
purities selected raw material. Arch stable without spatters Shielded
gas of Ar./ CO2 or CO2. International approved
|
Non copper-coated bare wire G3Si1/ER70S-6
for GMAW of C.Mn. steels as used in general construction with tensile
strength up to 510 MPa. Produced with an innovative system using high
purities selected raw material. Shielded gas of Ar./ CO2 or CO2.
| G2Si/ ER70S-3 solid wire designed for welding carbon and
carbon-manganese steels. Suitable for single and multipass welding of
general constructions. To be used under the shield of Ar+CO2 or CO2.
| AWS A 5.18: ER70S-G EN ISO 14341-A: G 42 2 M21 Z Bronze-coated solid wire suitable for welding thin, galvanised or electro-galvanised plates; very limited spattering thanks to the addition of Titanium. Used under the shield of |
High strength steels/Χάλυβες υψηλής αντοχής
Solid wire AWS A 5.28: ER100S-G; EN ISO 16834-A: G 62 4 M13 Mn3NiCrMo GMAW welding H.Y.S. steels with 700 MPa. Good mechanical properties has applications in fabrications of HSLA (high-strength low-alloy) To be used under the shield of Ar+O2. |
Solid wire AWS A 5.28: ER100S-G EN ISO
16834-A: G 62 3 M21 Mn3Ni1Mo, GMAW welding H.Y.S. steels with 700 MPa.
Good mechanical properties has applications in fabrications of HSLA
(high-strength low-alloy) To be used under the shield of Ar+O2.
| Solid wire AWS A 5.28: ER100S-G EN ISO 16834-A: G 69 4 M21 Mn3Ni1CrMo for GMAW welding H.Y.S. steels with 770 MPa. Good mechanical properties has applications in fabrications of HSLA (high-strength low-alloy) To be used under the shield of Ar+O2. |
Solid wire AWS A 5.28: ER100S-1 EN ISO 16834-A: G 62 5 M13 Mn3Ni1,5Mo; GMAW welding H.Y.S. steels with 700 MPa. Good mechanical properties has applications in fabrications of HSLA (high-strength low-alloy) To be used under the shield of Ar+O2. |
Low-alloy copper-coated solid wire with
Ni-Cr-Mo additions designed for welding high yield strength steels and
with tensile strength higher than 700 MPa. AWS A 5.28: ER100S-G.
| AWS A solid wire A 5.28: ER110S-1 (EN ISO 16834-A: G Mn3Ni2,5CrMo) for the overmatcing of steels H.Y.S. with 800 MPa. Good mechanical properties. Applications, on strongly stressed structures to be used under the protection of Ar + O2. |
AWS A 5.28: ER120S-G EN ISO 16834-A: G 89 4 M21 Mn4Ni2CrMo solid wire for welding in overmatcing of steels H.Y.S. with 890 MPa. Good mechanical properties. Applications, on strongly stressed structures to be used under the protection of Ar + O2. | AWS A 5.28: ER120S-1 EN ISO 16834-A: G 89 4 M21 Mn4Ni2CrMo solid wire for welding in overmatcing of steels H.Y.S. with 890 MPa. Good mechanical properties. Applications, on strongly stressed structures to be used under the protection of Ar + O2. |
Low-alloy copper-coated solid wire with
Cr-Mo additions designed for welding high strength steels of similar
chemical composition. It is used for overlay applications where moderate
hardness is required. To be used under the shield of Ar+CO2.
|
Creep - resistant steels/Πυρίμαχοι χάλυβες
Solid wire AWS A 5.28: ER80S-G EN ISO
21952-A: G CrMo1Si with 1.25% Cr and 0.5% Mo, for welding heat-resistant
steels. heat exchangers, boilers, pipes and pressure vessels up to
about 550 ° C. X and J Factor controlled. good mechanical properties
|
Solid wire AWS A 5.28: ER90S-G EN ISO
21952-A: G CrMo2Si Low-alloy 2.25% Cr and 1.0% Mo used for
heat-resistant steels in chemical industry operating at 600 ° C. deposit
very resistant to the phenomenon of solidification cracks, X and J
Factor controlled
|
Solid wire AWS A 5.28: ER80S-B2; EN ISO
21952-B: G 55 M22 1CM with1.25% Cr and 0.5% Mo, for welding
heat-resistant steels. heat exchangers, boilers, pipes and pressure
vessels up to about 550 ° C. X and J Factor controlled. good mechanical
properties
|
Solid wire AWS A 5.28: ER70S-B2L EN ISO
21952-B: G 52 M22 1CML with1.25% Cr and 0.5% Mo, for welding
heat-resistant steels. heat exchangers, boilers, pipes and pressure
vessels up to about 550 ° C. X and J Factor controlled. good mechanical
properties
|
Solid wire AWS A 5.28: ER90S-B3 EN ISO 21952-B: G 62 M22 2C1M Low-alloy 2.25% Cr and 1.0% Mo used for heat-resistant steels in chemical industry operating at 600 ° C. deposit very resistant to the phenomenon of solidification cracks, X and J Factor controlled |
Solid wire AWS A 5.28: ER90S-B3 EN ISO
21952-B: G 62 M22 2C1ML Low-alloy 2.25% Cr and 1.0% Mo used for
heat-resistant steels in chemical industry operating at 600 ° C. deposit
very resistant to the phenomenon of solidification cracks, X and J
Factor controlled
|
Special solid wire AWS A 5.28 : ER80S-B6: EN
ISO 21952-A: G CrMo5Si with 5% Cr and 0.5% Mo, for creep resistant
steels type 12 Cr Mo 19 5. Resistant to cold cracking used in repairing
molds of similar composition. X and J Factor checked.
|
Solid wire AWS A 5.28: ER90S-B8. For steels
9% Cr and 1.0% Mo, for creep resistant steel, ASTM A385 Gr 9A or DIN
X12CrMo9-1. Corrosion resistant and cold cracking. Good mechanical
characteristics. X and J checked
|
Solid wire cooper free AWS A 5.28: ER90S-B9 for welding P91 type steels. The presence of niobium, vanadium and nitrogen improve the thermal properties of creep resistance. Used in power plants fueled by fossil fuels. | AWS A 5.28: ER70S-A1 EN ISO 14341-A: G 46 2 M21 2Mo. Solid wire with 0.5% Mo used for welding low-alloyed steels and for creep resistance steels. Pipes and pressure vessels, max. temperature service up to 500 ° C. Mix Gas Ar + CO2. | AWS A 5.28: ER80S-D2 / ER90S-D2 EN ISO 14341-A: G 50 5 M21 4Mo.Solid
wire with 0.5% Mo for welding low-alloy steels with high tensile
strength and creep-resistant steels up to 500°C. Good impact strength at
low temperatures. Used under Mix of Ar+CO2.
|
Low temperature toughness steels/Χάλυβες χαμηλής σκληρότητας- θερμικής κατεργασίας
AWS A 5.28: ER80S-Ni1 EN ISO 14341-A: G 46 5 M21 3Ni1 solid wire for GMAW welding of fine-grained steels 1% Ni. The presence of Ni. Improves the characteristics of toughness at -50 ° C. used on offshore, GPL transport and storage. Ar / C02 protection | AWS A 5.28: ER80S-Ni2 EN ISO 14341-A: G 50 6 M21 2Ni2 Solid wire for GMAW welding of fine-grained 2-2.5% Ni. The presence of Ni. Improves the characteristics of toughness at -60 ° C. used on offshore, LNG transport and storage. Ar / C02 protection | AWS A 5.28: ER80S-Ni3 EN ISO 14341-B: G 57P 7 M22 SN71 Solid wire for GMAW welding of fine-grained 3-3.5% Ni. The presence of Ni. Improves the characteristics of toughness at -80 ° C. used on offshore, LNG transport and storage. Ar / C02 protection |
GMAW - SOLID WIRES (Μασίφ σύρματα σπείρα σπείρα)
- Κατασκευαστής: INE
- Κωδικός Προϊόντος:GMAW - SOLID WIRE
- Διαθεσιμότητα:Διαθέσιμο