• Agglomerated Welding Flux BF 1

Flux type: Aluminate-Rutile

Classification:
ISO 14174: S A AR 1 76 AC H5 *)
(EN 760: SA AR 1 76 AC)

product data

Characteristics

Designed for all SAW-processes and welding of ordinary carbon-manganese, low alloy structural and boiler quality steels with yield strength up to 355 MPa (t < 25 mm) in combination with wire grades S1, S2, S2Mo and S CrMo1. The flux is suitable for high speed welding (up to 2 m/min.) and provides very good weld bead appearance and excellent slag release even with small angle preparation and fillet welds. The chemical nature of BF 1 flux provides high resistance to cracking on single pass applications. Additional features are resistance to porosity when welding rusty plates, heavy scale or other contaminations of plate surfaces (e.g. special primer-coatings) and low sensitivity towards arc blow.

Application

Preferentially used for single-run, two-run and fillet SA-welding. Main fields of application include structural steelwork, thin-walled containers, LP-gas cylinders and fin-tube walls.

Characteristic chemical constituents


Agglomerated Welding Flux BF 1

Related Products

Agglomerated Welding Flux BF 8.1

Agglomerated Welding Flux BF 8.1

Flux type: Calcium-Silicate Classification: ISO 14174: S A CS 1 75 AC (EN 760: SA CS 1 75 AC) ..

Fused Welding Flux WP 380

Fused Welding Flux WP 380

Flux type: Calcium-Silicate Classification:ISO 14174 (low alloy steels): S F CS 1 63 DCISO 14174 (s..